HOME > Feed Products
Food Residue Drying Production Line

Capicility: 0.81-3.26(t/day)

Production cycle: 45(day)


Product Description

The equipment has the advantages of large production, high efficiency, energy saving and small floor area. It can used together with the clean hot air furnace and  suitable for drying high moisture materials such as food residue and so on. The moisture can be dried quickly from 65-75% to 14-18% at a time, and the dry food residue completely retains its original nutritional components, with bright colors and delicate scent. Comparing with the traditional dryer, the energy consumption can be reduced 30-50%, which can save energy and reduce the operating cost.

The dryer is suitable for food residue, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, bean stalks,etc.  Dingli company optimizes the drying technology and equipment selection and configuration service according to the characteristics of each material, the size of production, the quality requirements, the application demand, the cost control, the automatic degree, the field working condition, the investment quota and so on.


Material Flow: the raw material with 75-85% moisture will be sent into the dewatering machine, and then the moisture will be reduced to 60-65%, then feed into the dryer by screw conveyor, concurrent flow drying. Under the effect of inner shoveling plate, materials are took and scattered constantly, and move in spiral forward method. Through three layers (inner, middle and outer layer), heat exchange are realized between material and hot air medium. The materials that achieve drying effect move forward fast and are discharged out of the roller. Wet materials that still don’t achieve drying effect couldn’t move fast due to self-weight, and are dried completely during the controlling route, thus achieving drying effect. . After the whole drying process is completed, materials are discharged by screw conveyor. The final moisture will be reduced to 14-18% (can be adjusted according to buyer’s requirement). there is special device inside the dryer, can prevent the unequal drying of materials.
Air Flow: through hot blast stove and air blower inflating, the air enters into the hot blast stove for combustion heating. Its temperature reaches up to 600-850℃, then it is inhaled by the dryer induced draft fan to dry material and evaporate water. When temperature decreases to 55-60℃, it is discharged out of the dryer. Wet air containing dust are discharged on standard through dust remover purifying.


Specification Input Capacity(t/d) Output(t/d) Evaporation Capacity(t/h) Raw Material Moisture(%) Dried Material Moisture(%) Drying temperature(℃) Total Power(kw) Total Weight(kg) Area
DLCG2006/3 76.93 1.08-0.27 0.61 45-75% 14-18% (Adjustable) 280±30℃ (Average temperature) 28-35 19500 8m*12m
DLCG2008/3 105.19 1.48-0.37 0.84 45-66 22000 8m*15m
DLCG2010/3 133.45 1.88-0.46 1.06 56-78 24000 8m*18m
DLCG2012/3 161.71 2.57-0.64 1.45 60-82 25500 8m*20m
DLCG2212/3 183.05 2.92-0.72 1.65 65-85 27000 8m*20m
DLCG2512/3 204.72 3.26-0.81 1.84 90-125 38000 10m*20m

Successful Case

Everything makes customers satisfied

General heat source

suitable for a variety of heat sources, not restricted by heat source

Low operating costs

Low energy consumption and low operating costs

Environmental protection

use various of dust collectors to meet local environmental standards

Quality control

High-precision process equipment, strict quality control

We are the best!

Support customization

customized equipment according to customer needs

Technical guidance

professional and technical personn-el on-site guidance operation

Automatic operation

automatic operation, simple operati-on and saving manpower

Online Message

+86-371-56739888 +86-371-68823758 [email protected]
No.12 Hongye Road HI-TECH Development Zone, Zhengzhou,China